Categories
BLOG

how to make cannabis oil

How to make Cannabis Oil

Olive oil is a product that many people consume as part of their daily diet due to its many health benefits, but what about cannabis oil? Cannabis oil doesn’t generally figure in many people’s diets, especially not those that don’t consume cannabis, although this is slowly changing. Thanks to the recent wave of legalizations around the world and the investigations being done, we’re finding out more about cannabis’ properties and its amazing benefits when used correctly. That’s why today we’re going to teach you how to make cannabis oil.

Everyone should be able to make the most of cannabis’s incredible properties without needing to smoke it. We’re going to show you how to make cannabis oil. Its properties may vary depending on the cannabis used to make it, which can be THC or CBD dominant. Either way, the recipe is the same.

Let’s have a look at these two recipes that result in delicious, cannabinoid-ruch homemade cannabis oil.

How to make cannabis oil:

Before you start with the recipe, you’ll need to figure out the type of cannabis you’re going to be using. You can use THC rich, CBD rich or balanced cannabis for this recipe.

If you’re looking to make oil that anyone can consume without getting any sort of psychoactive effect, you should use high-CBD cannabis that contains extremely low THC levels. You should use strains such as Sweet Pure CBD by Sweet Seeds or Solodiol by Elite Seeds. The effects produced by CBD-rich strains make them perfect for daily consumption.

For those looking to make cannabis oil that has all of cannabis’s properties, including the psychoactive ones, we highly recommend using a strain with high THC levels or more THC than CBD. This allows you to create a cannabis oil that’s capable of alleviating intense muscular pain, reduce epileptic attacks, increase appetite, treat insomnia etc. It’s also a much safer way to consume cannabis as you don’t need to inhale any nasty smoke.

Ingredients and materials:

  • 500-700ml virgin extra olive oil
  • 20-25g dry and cured cannabis
  • One kitchen thermometer
  • One kitchen spatula
  • Large pot (3-5L)
  • Small pot (1L)
  • A weed grinder
  • A coffee filter
  • One thin metal sieve
  • One glass container with lid
  • 5L bottled water

How to make cannabis oil | RECIPE 1

This first recipe is the easiest to make, as it hardly needs much work and it just requires a bit of patience.

  • 1: Begin by washing and decarbing your cannabis using your preferred process. If you want a less psychoactive effect and more medicinal properties from your oil, simply wash your cannabis before using and skip the decarb process (only do this if you do not want a psychoactive end result).
  • 2: Get a glass bowl that’s large enough for the amount of oil you plan on making
  • 3: Pour your preferred virgin extra olive oil into the bowl
  • 4: Add 20-25g of dried, cured cannabis (not ground)
  • 5: Let it macerate in a dark, dry place for a couple of weeks, Mix every now and then so that the cannabis fully releases its properties
  • 6: After a couple of weeks it should be ready to consume
  • 7: Do not remove the cannabis
  • 8: If the cannabis oil turns out too strong, pour the oil into a new glass bottle and add one fourth virgin extra olive oil in order to soften the effect. Shake well and let it sit in the dark for a couple of days so that it mixes properly
  • 9: Your cannabis oil is now ready to use as a food supplement, as drops or even as a skin cream!

How to make cannabis oil | RECIPE 2

This second cannabis oil recipe is a bit more hands-on and much faster. You’ll need to grab your cooking gear and get to it! The resulting oil form this recipe is much more refined than the first recipe we dealt with.

1- Boil your cannabis

Place your weed in a large pot and add enough water to cover the cannabis. Once it begins to boil, lower the heat setting to the lowest and keep it there for 10 minutes, stirring every now and then.

2- Strain your cannabis

After 10 minutes, you’ll need to strain your cannabis. Pour your flowers into the sieve and let the water drain out without putting any pressure on it. Repeat the entire process, boiling the weed again, until the water comes out clean (3 times should do it).

3- No water

Once you’ve strained your cannabis you’ll need to try and get it to lose as much water as possible. In order to keep all of its cannabinoids intact, we recommend covering a flat surface with non-aromatic kitchen paper and placing your cannabis on top. This allows the kitchen paper to absorb any leftover water without needing to press your weed down.

Remember: this is done to fully clean your cannabis, removing dust, insects, any products, chlorophyll and leftover minerals. This process is entirely safe, as marihuana doesn’t dissolve or attach to water and no cannabinoids are lost.

4- Add your virgin extra olive oil

Once your cannabis is clean and all water has been extracted, you’ll need to place it in a small pot and add your virgin extra olive oil.

5- Bain-Marie

In order to heat your cannabis in the right way so that it dissolves all of its cannabinoids in the oil, first you’ll need to fill the large pot with water and place the smaller pot, the one with the oil and cannabis, floating in the water in the larger pot. Boil the large pot.

6- Bain-Marie timing

Once the water is boiling, the cannabinoid-assimilation process has begun. This can be quite a slow process, taking a few hours, although it’s much faster than the first recipe. For the best possible results, we recommend continuing this process for two to three hours, mixing every now and then. In order to get perfect results, try and keep the temperature at a stable 100°C. You can use a kitchen thermometer for this purpose.

7- Bottling

After the bain-marie, you’ll need to let the liquid cool down in its pot. Once it’s cooled down you should strain the mixture using the coffee filter. Do it with incredible care, making sure that no bits of cannabis get through the filter. Your cannabis oil is now ready!

8- How to store cannabis oil

Once you’ve made your oil, you’ll need to store it in a dark, cool area. This allows cannabinoids to stay 100% potent for much longer. We recommend keeping the main bottle in a dark place and using a small oil bottle for your food.

How to take cannabis oil

Cannabis Oil as Salad Dressing

One of the best ways of ingesting cannabis oil is raw. If it’s used to fry anything, it loses all of its properties in as far as cannabinoids due to high temperatures. We recommend using it as a dressing for salads, making sure to test it out beforehand to test its strength and how much you should use.

Massage Cannabis Oil

For those that suffer from muscle or back pain, cannabis oil can be used as potent massage oil; it has many relaxing and therapeutic effects and can be used for any type of massage; it can also be used in reflexology. You can also add it to any massage cream or oil such as lavender or rosemary, among others.

Sub-lingual Cannabis Oil

If you want to use it as a direct dose, you can use it sub-lingually. Simply use a dropper under your tongue and then slowly allow them to spread around your mouth. This is a much more direct way and is recommended for medicinal use.

Cannabis Oil Safety Precautions

Before you start taking cannabis oil, whether it’s occasionally or daily, you will need to do a few tests to see how potent it is. We recommend trying out a couple of drops and waiting for a few hours to see if its effects are too soft or too hard. If it’s too potent you can add in ¼ of normal oil and shake well to mix it up. You can repeat this process as much as possible.

When ingesting oil of this kind you’ll need to be extremely cautious. You need to mark every bottle carefully – if someone accidentally uses it on their salad, they probably won’t have a very nice trip. You will also need to take extreme caution when it comes to kids running around the house. If not labelled correctly and stored somewhere that kids can get to, you may have quite a bad situation on your hands. Keep your cannabis oil away from kids, labelled properly and make sure you know where it is.

Have you ever wondered how to make cannabis oil? You can add it to so many different dishes and it also has plenty of different beneficial properties!

How to Make Hash Oil (aka Cannabis Extract Oil or RSO)

Table of Contents:

What is Hash Oil (Cannabis Extract Oil)?

There are several ways that cannabis growers can turn their homegrown bud into edible extracts. Some of the most popular are canna-caps, cannabutter, and tinctures.

Hash oil – also known as Cannabis Extract Oil or RSO – is a popular cannabis extract that many home-growers are producing themselves using their trim (trimmed off, trichome-covered leaves) or bud. Simply put, hash oil is the resin from a cannabis plant mixed in with a tiny amount of a solution. In a perfect case, the solution would be totally removed from the hash oil when it’s done.

Why is hash oil so great?

  • Super concentrated form of cannabis that’s edible and smokable
  • Easy to make hash oil with typical kitchen items
  • Specialized tools can automate the process
  • Easy to store and dispense in measured amounts

This hash oil took about 1/2oz of bud! Yikes! (It was worth it)

While some extracts use coconut oil, butter, or even isopropyl alcohol to bind to THC, hash oil is made with food-grade high-proof alcohol. Growers usually use ethanol or Everclear, but Spirytus, high-proof grape alcohol, or anything along those lines, will do the job.

After the alcohol and weed are mixed, the mixture is strained and evaporated leaving a thick, oily substance that is mostly resin. Since this “oil” is so potent, very little needs to be used at a time which means that a small amount of hash oil can go a very long way. Hash oil can be eaten, vaporized, smoked, dabbed, or even used for topical applications.

What’s with the name “RSO”? A guy named Rick Simpson coined the term “Rick Simpson Oil” to refer to his style of hash oil. It turns out that RSO is much easier to say/type than “Cannabis Extract Oil”, so people tend to use RSO more often. We prefer “Hash Oil” as it’s more descriptive, but the two terms can be used interchangeably.

What Type of Alcohol Should You Use?

Any high-proof (190-proof or higher) alcohol that is meant for human consumption will work. Although isopropyl alcohol can be used for topical applications, we recommend using food-grade alcohol even in that case. In other words, please don’t use isopropyl alcohol for this tutorial! You can use any 190-proof (or higher) alcohol such as:

  • Ethanol
  • Rectified/Neutral spirits:
    • Everclear
    • Spirytus (high-proof polish vodka)
    • Grape Alcohol

You can legally get your hands on at least one of these options in all 50 states in the US, plus Canada, UK, and Australia. Bacardi 151 is available in most places and it has a pretty high alcohol content (151-proof), but it should only be used as a worst-case option.

Do I Need to Decarb My Weed First?

For those who aren’t familiar, decarb is short for “decarboxylation”. Decarboxylating (or decarbing) describes the process of slowly cooking your weed to activate all the good stuff in it by turning THC-A to THC.

Now that we’re all on the same page, do you need to decarb your weed before making hash oil?

The answer to this question can vary based on your reasons for making hash oil. However, in my opinion, the answer is “Yes, you should decarb 100% of the time when making hash oil!

So, why wouldn’t you decarb? There are two main reasons people don’t decarb their weed before making hash oil:

  1. They believe THC-A has medicinal properties
    • The process of making hash oil on its own doesn’t create enough heat to turn THC-A into the more potent THC. If you don’t decarb, you’ll have oil that’s mostly THC-A.
  2. They don’t want psychoactive effects
    • THC gets you “high”, THC-A does not. Ingesting hash oil without decarbing the weed won’t get you “high” since it will be mostly THC-A. For some people, that’s a plus.

For the rest of us who do want our oil to be psychoactive, decarbing your weed is an absolute necessity. If you don’t decarb, the oil will have a much weaker effect on you. So if you want that “high” feeling, make sure to decarb your weed!

We have a full article on different ways to decarb, but here are the quick steps:

How to Decarb Weed

  • Oven
  • Baking Sheet
  • Foil or Parchment paper (no wax paper!)
  • Weed
  1. Preheat oven to 250°F
  2. Line your baking sheet with foil or parchment paper
  3. Place your broken-up or ground cannabis on the baking sheet
  4. Bake cannabis for 30 minutes (your cannabis will turn golden-brown)

Decarbing weed: Before and After. [Click on image for a larger version]

Check out our full article on decarboxylation for more info: https://www.growweedeasy.com/how-to-decarb-weed

Tinctures & Quick Wash

One last thing before we start…

Do you have cannabis tincture just lying around your house by any chance? I know it’s a weird question, but some growers have some lying around in the fridge or freezer (a tincture is a cannabis-infused alcohol). If that’s the case, you can skip straight to evaporating the alcohol!

If you don’t have tincture around your house (which is probably the case), you can do a “quick wash” to make the tincture. It’s a super easy recipe, but it’s also effective despite its ease. Although you can have a quick wash done in around 20 minutes, you can make it even better by freezing your alcohol and weed overnight.

Your starting mixture will determine the color, flavor, and strength of your resulting hash oil. Tinctures like the one on this tutorial come out dark, and the resulting hash oil will be almost black, which is the “traditional” RSO look. Adversely, a well-done quick wash (like in the instructions below) will produce a gold-colored tincture that will result in golden hash oil. Both methods have their perks and I would encourage you to try making hash oil both ways.

Note: If you’re interested in using tinctures on their own, we have an article on making those, too! Check it out here: https://www.growweedeasy.com/how-to-make-cannabis-tinctures

  • 2x Mason Jar
  • Decarbed weed (recipe above)
    • If you don’t want psychoactive effects, don’t decarb the weed
  • High-proof alcohol (190-proof or higher)
  • Paper coffee filters

Despite how it may look, that’s a well-made quick wash tincture. Gold is the color you’re looking for.

How to “Quick Wash”

  1. If possible, place your alcohol and weed in the freezer overnight. This makes the alcohol absorb less unwanted material like chlorophyll.
  2. Place your cold, decarbed weed in a mason jar.
  3. Pour in enough freezing-cold alcohol to completely cover the weed, plus another 1/4”(1/2cm) or so.
  4. Let the mixture sit until 20 minutes have passed.
    1. Tip: I like to shake up my mixture for about 30 seconds after the 20 minutes are up.
  5. Place a coffee filter over your second mason jar
  6. Pour the mixture through a coffee filter
  7. You now have quick wash tincture!

How to Make Cannabis Extract Oil – Manual Method

Believe it or not, you’re already about halfway through the process. You’ve already made a usable tincture. The next step is to reduce the alcohol in the tincture until the cannabis resin is (almost) the only thing that’s left. This could be accomplished by just letting the mixture sit out until the alcohol evaporates, but that could take many days.

Instead, we’re going to use a double-cooker method to evaporate the alcohol using a stove. As long as you are careful and use low-heat on an electric stove, you’ll be totally fine. Don’t try this on a gas stove because high-proof alcohol combined with an open flame is a recipe for disaster.

Tincture being reduced to hash oil using a double boiler on a kitchen stove

  • Make sure there is good ventilation in the room your using. Opening a window will usually do.
  • No open flames. That means no lighters, candles, or gas stoves.
  • Keep a fire extinguisher handy. Remember, a fire extinguisher can turn a disaster into a minor inconvenience.
  • Don’t go anywhere. Stay with your hash oil until it’s done and you’ve turned everything off.
  • Tincture
    • Use one of the simple Quick Wash recipes above or check out our tinctures page)
  • Double boiler
    • You can make a double boiler using a pot and pan. Click here to see an example picture.
    • Important note: If you make a double boiler using a pot and pan, make sure they don’t fit together perfectly. Steam needs to be able to escape from the bottom pan or else there will be trouble.
  1. Fill the bottom pot of your double boiler with about 3 inches of water.
  2. Heat the water until it boils, then turn the heat to medium-low
  3. Put on the top part of your double boiler. If you’re using a pan, make sure steam can escape.
  4. Pour your tincture into the top pan
  5. The tincture should heat up and eventually roil a bit
  6. Continue to monitor the tincture as is slowly evaporates into an oily, sludge-like substance
    • Note: The longer you cook it, the more the texture will change. Less cooking evaporates less alcohol which makes it more liquid, more cooking makes it harder/waxier.
  7. Turn off the heat and collect your hash oil. Collecting your oil will be much easier while it’s still warm, so be quick!

How to Make Cannabis Extract Oil – Automated Method

Making hash oil is pretty easy with a stove, but it’s even easier if you use a machine.

There’s a device called the Source Turbo extractor and it does the same job as a double boiler, but with a few added benefits:

  • The source extractor recovers about 95% of your alcohol so you can use it again and again. High-proof alcohol is a bit pricey, so this can save a heap of money over time.
  • It’s safer. The source creates a vacuum so there are no fumes to ignite. Additionally, the Source doesn’t get hot enough to ignite alcohol fumes, so fire isn’t really a worry.
  • It’s much easier to do than using a double boiler. You pretty much set it up and come back when it’s done. Still, we recommend staying in the same room with your extractor until it’s done.

Here’s our Source Turbo extractor in action. Notice the little pool of pure alcohol collecting at the bottom.

It’s a really cool machine to have if you want to make hash oil, but it has one major setback: the price! The Source Extractor Turbo costs quite a bit ($600) even though it’s the cheaper version of another extractor made by the same company. I wasn’t happy spending the money to test this thing out, but now that I have it and have tried the hash oil, I feel it was worth the money and I would definitely make the purchase again.

Supplies Needed:

  • Tincture
    • Use one of the Quick Wash recipes above or check out our tinctures page)
  • Source Extractor Turbo
    • The more expensive version is for people who make tons of oil at once.

Steps:

The Source comes with a web link that leads to instructions on how to use the device. It’s a quick read and will help you get the most out of your extractions. Here’s an even quicker version of what you need to do.

  1. Place your Source on a flat surface and make sure all the parts are aligned.
  2. Pour your tincture into the reservoir cup and screw the cup into the Source.
  3. Put the lid on your Source, then plug it in and seal the vacuum using the valve on the front.
  4. Start the Source and it will make a loud sound as it starts to create a vacuum.
  5. Make sure it reaches full vacuum (the sound will stop) which should take less than 5 minutes. There’s also a phone app to tell you when it’s at full vacuum. If it’s vacuuming too long, turn it off and troubleshoot with the company’s guide.
  6. When the extraction is finished, stop the machine, release the vacuum and let the chamber cool for a few minutes.
  7. You can allow the oil to cook for as long as desired. The texture will change as it cooks, going from a tincture to oil to some sap-like stuff to a wax. Stop it whenever YOU like the texture and consistency.
  8. Collect your extract
  9. Collect your alcohol from the extractor and store for reuse.

The Source Turbo extractor is like a crockpot for making awesome hash oil. You can get one on Amazon.com.

How Do I Use Cannabis Extract Oil?

You can use hash oil in a ton of different ways! The way you use it will depend on the consistency of the oil you made.

  • If you boiled it down to a much-stronger tincture, you can just eat it or put it into a liquid with a strong flavor.
  • Oils can be mixed into food, put on flowers, or rolled into joints
  • Wax can be melted into weed (called “caviar”), vaporized, or dabbed.
  • Since all of the substance you make will be decarboxylated, you can just eat it directly and you’ll definitely feel the effects.

Hash oil can be stored in the fridge, though cold hash oil is almost solid until it’s warmed up. You can eat it directly or add it to anything edible to help mask the taste.

Want to eat oil with zero taste? Use an empty gelatin capsule. Pop one open, squeeze in some oil, and snap close for easy swallowing. Bonus: these caps are easy to hide in a vitamin bottle.

Nebula enjoying some hash oil on toast with jam

How to Make Hash Oil (aka Cannabis Extract Oil or RSO) Table of Contents: What is Hash Oil (Cannabis Extract Oil)? There are several ways that cannabis growers can turn their homegrown bud