Categories
BLOG

what to do with male cannabis plants

How to Pick Male Plants and Make Cannabis Seeds

Why Every Home Grower Should Make Seeds (At Least Once)

I encourage growers to make seeds for themselves. A lot of people have been asking how, so I put together these basic tips. Hopefully, it helps a lot of people and is fairly straightforward. This isn’t meant to make you a breeder or share all my techniques or secrets, this is to familiarize you with the process of creating seeds.

It’s easy to make your own cannabis seeds at home!

It’s a shame that many grow books tell you only to throw away your males. New growers may not know, but anyone who’s grown for even just a few years gets to the point where they wish they still had something they grew in the past, which is no longer available in seed or clone for whatever reason. The older you get the more it happens. Seed lines disappear entirely once they run out, and due to people not making their own. It’s good to be self-sufficient.

While it’s always fun to check out the hard work of your favorite breeders and their strains, it’s equally as important to pollinate a branch or two for yourself here and there and see what magic you can create or preserve. Please share this article if it helps or inspires you. Big agriculture is coming to the cannabis growing world and has the ability to change the plant forever once contamination happens, just like in the veggie world. We are losing genetic diversity fast as thousands of unique strains are lost. Please do your part if you are passionate!

Make your own seeds to save special or unique genetics

How to Make Your Own Cannabis Seeds at Home

These are basic starting points for the home grower. I believe every person who grows cannabis needs to have this skill. Every strain goes away over time when people don’t make more seeds. Growers should know how to make their own seeds for preservation and sustainability. These skills can go a long way. The precursor to serious breeding is the basic technique of creating the seed.

1.) Grow Male Plants

Male plants can be grown in very basic conditions in an isolated space, then flowered for pollen. Males can be started flowering next to females with a close watch for the first week or two, but be careful and remove them before pollen sacks form, bursting open and pollinating everything.

Branches can be cut off and put into a cup of water on a windowsill or under a CFL bulb, even under veg light cycle once they are in bloom. Pollen can be collected within a week from these branches, saving lots of space. Males can also be cloned or flowered very small based on your needs.

Best, however, is flowering the males in their own tent or space. With a carbon filter and negative pressure, and careful practices, you can avoid spreading pollen to unwanted spaces. The longer you flower a male out past its initial beginning release of pollen, the more of its flowering traits you will see! (More on best male plant selection below)

A beautiful male cannabis plant

2.) Collect Pollen

Pollen can be collected by tapping a budding branch gently over a piece of paper. Pollen will spread easily in the air, so make sure to turn off all fans. Visit males only after tending to female plants so you don’t accidentally bring any stray pollen on your clothes or hair!

A male plant right as pollen sacs start opening

3.) Pollinate Buds

Take out your female to be pollinated or shut off all circulation fans. Gently apply pollen to a labeled branch. The pollen must meet the white flowering hairs to create seeds. Week 3-5 is best to pollinate, and you can do a single bud or branch per plant and keep the rest seedless.

Every pollinated branch should be labeled properly, your memory will not last as you think it will. A proper branch label includes dates, strain names, breeder/sources, and has the female listed first and male listed second. An example label looks like this: 4/20/2015 – Star Pupil (Mass Medical Strains) x Prayer Tower Sativa 9 (Bodhi Seeds) and the label should be kept with the seeds when they are finished. As years go by, you will be thankful for the dates and breeder information, which can escape our memory on occasion.

Overhead shot of a seeded cannabis plant. Strain is “Star Pupil”

4.) Deactivate Stray Pollen

Water generally deactivates pollen, wash clothes and shower if needed after handling. 3+ hours after pollination, the plant can be sprayed down with water to deactivate stray pollen and can be brought back into grow room and fans turned back on.

Avoid spreading pollen unintentionally. It can get everywhere!

A male cannabis plant exploding with pollen. Strain: Prayer Tower Sativa (below)

5.) Collect Seeds

Seeds are done in 2-6 weeks and should be dried in the bud when the plant is harvested. Seeds should be sproutable within one month of drying.

Female buds become swollen with seeds

A cannabis seed peaking out

What strains should I use?

Any strain with traits that you like, which speaks to you, or seems like a good cross, means your intuition is telling you something. Starting with stabilized or homogeneous lines is always a benefit. Certain genes such as Cookies, OG, and Diesels, are full of hermaphrodites and should be used with caution, only to be bred with if they are really your #1 passion. Follow your heart.

Crossing two unrelated strains for the first time is called an F1. Crossing a brother and sister F1 of the same strain creates an F2, and so on. Selections play a huge role in what the outcome will be. Making F2 seeds of an F1 you purchased, will not give you the same seeds. Rather, you will see new phenotypes resembling some of the parents and their parents, etc. With huge potential to find new special plants within.

Many combinations will work great, and some will not. If you fail, try again, selecting new parents. Each combination is unique. A and B might work great together, and C and D might work well together, there’s still a possibility that A and C combine to create junk. Every parental combo is unique!

If you see a unique trait that you like, make seeds!

Selection Techniques

Female Plants

Selecting a good female is easy, flower female plants from seed and again from clone to test stability. Smoke test is important. A potential mother plant should have all the high-quality traits that matter to you. Hermaphroditic plants are to be avoided.

Female plants to be pollinated should have all your ideal traits. Use only your best females.

Male Plants

Selecting a male, you have to use your senses a lot. The ones who grow best and smell best are a good starting point. Structure and root growth are important. Hollow stems may indicate high THC potential. Cut the top off a couple nodes down and find out. First showing or fastest flowering males are generally discarded. Very slow blooming late males are often times more recessive although not always. I like them. Males will start to drop pollen before they are “done” flowering enough to see their true traits. As a beginner, you can use the pollen at any stage, but those doing real selections are advised to always flower your males for weeks after the pollen starts.

For male selections, a strain you’ve grown before and enjoyed the females is a safe starting point.

Watch for resin production, look at how the flower clusters stack and produce. The male flowers form similarly to female flowers, large yield potential is often apparent in largely formed male clusters that can look almost like female buds from a distance. The more males you have to choose from, the more fun you will have!

Male plants can be a lot of fun to grow, too. Just like the females of the genetics they come from, they all have their own characteristics and unique traits. Once you get into “hunting males” you could get hooked! Some of my prized male selections from over the years are shown here. You’ll see resin production and traits of large floral clusters, as well as unique coloration!

This male Weapon X cannabis plant is about to pop!

Male Blue Magoo BX looking trippy under LEDs

Strain: Mr. E Reversed

For more advanced breeding selections, I recommend starting ideally a few hundred seeds. (For beginners, as many as you can is great, will help you find the best ones you can. Use your intuition!) Plants can be weeded out every few weeks selecting only the best contenders to flower out, and a lot can be achieved in a spare tent or closet this way, while still selecting through large populations! Clones of a prized breeding male may be kept in veg the same way females are, to be used again and again once their offspring are proven good! This is how a breeder can create the same batch of seeds for years and years, by using the exact same parents held in clone form.

Conclusion

These tips are just the beginning, and the purpose isn’t to teach you how to breed, but to teach you how to learn your own path and style of creating seeds and preserving our very special plant. The seeds you create will always be a very special grow for YOU.

Making your own seeds is more important than ever. We must do our part to preserve the natural genetic diversity of this healing plant as it has evolved for millions of years. Home growing is an important skill as commercial and medical cannabis is increasingly full of toxins and scary new technology. Please grow responsibly with love.

About the Author

Star Pupil strives to copy nature while incorporating breeding techniques and plant knowledge passed down from generations of experienced growers. Mass Medical Strains is located in western Massachusetts and all breeding and growing methods are 100% organic. Each and every plant is grown and harvested with wholesome intentions and positive vibes.

  • Mass Medical Strains Website
  • Instagram account (Note from Nebula Haze: Check out their Instagram to see new pictures of all their strains!)

How to Pick Male Plants and Make Cannabis Seeds Why Every Home Grower Should Make Seeds (At Least Once) I encourage growers to make seeds for themselves. A lot of people have been asking how,

Male vs Female Cannabis Plants

Table of Contents

Marijuana Life Stages & Gender: Only Female Cannabis Plants Make Buds

Did you know there are both male and female marijuana plants? Yes, marijuana plants show gender, and the sex matters a lot to the grower.

That’s because only female plants produce buds. How do you grow female plants?

Regular marijuana seeds will be 50% male, and 50% female. That means half of the seeds will be unusable as far as growing buds.

One way around this is to purchased feminized seeds online. These seeds are available from all reputable online seedbanks, and the plants produced by these seeds are always female.

You can also make your own feminized seeds, but you have to start with two known female plants.

When do marijuana plants reveal their gender?

Cannabis plants go through two stages of life, the “vegetative” stage and the “flowering stage.”

They first go through the vegetative life stage, which you can sort of consider its “childhood” since the plant is only focusing on growing bigger and taller, and gender doesn’t matter. At the beginning of this stage you usually can’t tell what the plant’s gender is.

However, once the plant is about 6 weeks old, it will usually show signs of “pre-flowers” which will alert you to the gender before the beginning of the flowering stage.

Pre-Flowers usually reveal the gender around week 6 from seed

Otherwise you must wait for the flowering stage

Next, cannabis plants switch to the flowering stage which means they stop growing bigger and taller, and instead spend all their effort growing flowers (the buds we want are flowers!). The flowering stage is like the “adult” stage of a cannabis plant since at this point it’s only interested in adult stuff like growing their male and female parts, then pollinating 🙂 In the flowering stage, plants start growing buds or pollen sacs in earnest. The buds we want are female flowers, so growers generally only want to grow female plants.

Growers Want Female Cannabis Plants – These Produce Bud

Regular Marijuana plants reveal their gender in two situations:

After spending a long time in the vegetative stage – some strains/plants will show preflowers (pistils for girls and “balls” for boys) during the vegetative stage if they grow old enough, even when they are constantly kept under a vegetative light schedule. For example, clones can come from plants that are several years old, so you’ll see a lot of clones have female pistils showing, yet will not continue to flower any more than that until after they’ve been switched to a Flowering (12-12) light schedule

Otherwise, all remaining plants will reveal their gender in the first 1-3 weeks after lights are switched to 12-12, and plants enter the flowering stage of life.

Diagram Showing What Pre-Flowers Look Like
Male pre-flowers on left – Female pre-flowers on right

Female Marijuana Plant Pictures

Female marijuana plants take a bit longer than males to show their first signs after being changed over to flowering.

Female marijuana plants start showing one or two wispy white hairs where their buds are going to start forming.

They usually first show up where the main stem connects to the individual nodes or ‘branches’.

If a female plant is kept in the vegetative stage long enough (the length of time varies depending on the strain and conditions), then she will start showing the first sign of female hairs even before you move the plant into the flowering stage by changing the light schedule.

If you see wispy white hairs appearing on your plant like the ones pictured below, then you know you have a female plant.

Click on thumbnails for larger picture

In this pic, you can see white pistils emerging from the calyxes. Female pistils are white and wispy, never green.

This pre-flower doesn’t have a pistil sticking out at first, but the shape helps tell you it’s a female plant. If you’re not sure about gender after spotting a pre-flower, it’s a good idea to wait and see for a little while, just to see if a white hair appears (which means it’s definitely a girl)

Adult Female Cannabis Plant Pictures

Those buds turn into this!

Male Marijuana Plant Pictures

Male plants have grape-like balls which form and fill with pollen. The balls will first show up a week or two after changing the plants over to the flowering stage. If the male is allowed to continue growing, eventually these pollen sacs will burst open and spill pollen everywhere.

A small male pre-flower – this is what male plants look like when they first reveal their gender

These male pre-flowers are basically immature pollen sacs. When the plant starts flowering, they will grow and turn into bunches that almost look like grapes.

Click on thumbnails for larger picture

Uncertain pre-flower – ended up being female!

Sometimes it takes a day or two for a female pre-flower to release her first pistil, and the female calyx can look like the beginning of a pollen sac. Generally the more “pointy” ones tend to be female, but sometimes you have to wait and see a few more flowers to know for sure.

Marijuana plants go through 2 life stages: Vegetative and Flowering

Quick Key to Light Schedules For Photoperiod (Non-Autoflowering) Strains

This key breaks down some of the terms used in the article below such as “24-0″ or 12-12”

Vegetative – Indoor cannabis plants kept on these light schedules will display only vegetative growth

18-6 – 18 Hours Light / 6 Hours Darkness each Day
24-0 – 24 Hours Light / 0 Hours Darkness each Day

Flowering – Indoor cannabis plants on this light schedule will start growing flowers (buds)

12-12 – 12 Hours Light / 12 Hours Darkness each Day

* Most indoor growers use a timer to turn their lights on and off automatically.

The first stage, “Vegetative” begins when they first sprout, at the beginning of their life.

Most growers give their plants 18-24 hours of light a day during the vegetative stage.

When a plant is about half the final size you want it to be, you should change it over to the “Flowering” stage.

The second life stage, “Flowering,” is the stage your plant will remain in until harvest..

You get marijuana plants start flowering (making buds) by changing your light schedule to 12-12.

That means you use an electric timer to automatically shine your grow lights for 12 hours a day, with 12 hours of uninterrupted TOTAL darkness during the plant’s “night period.”

Marijuana plants should reveal the first signs of their gender within 2-3 weeks after being changed to 12-12.

How Light Schedules Affect Marijuana Life Stages

Marijuana plants have an internal process where they can detect how long they receive uninterrupted darkness each day.

In the wild, as the days get shorter and nights get longer, the marijuana plant “realizes” that winter is coming and will start budding/flowering as it approaches the end of it’s lifecycle.

When growing marijuana outdoors, a grower doesn’t need to do anything to induce flowering because the sun will take care of things on its own. All you need to do is make sure your plant isn’t directly under a street light or other light source, so that the plant receives complete darkness at night.

However, when growing marijuana indoors, a marijuana gardener will have to “fool” their plants into thinking winter is coming to induce flowering and kickstart the creation of buds.

This is done by changing the plant’s light schedule to 12-12, where the weed plants gets 12 hours of light a day and 12 hours of total darkness.

It’s easier to ensure the plant gets the 12 full hours of darkness each night when the start and end time for your lights to turn on and off is exactly the same each day. This is why most growers end up getting a timer to turn their lights on and off automatically.

I tend to set my timer in flowering to shine line from 7pm-7am. This gives me time to check on my plants at night when the lights first come on, and I can also check them quickly in the morning before I go to work. It also keeps things cooler since the lights are on at night. Some people (like myself) also get discounts on electricity that’s used at night.

But ANY 12 hour dark period will work, as long as you prevent your plant from getting light leaks during their “night.”

In fact, with marijuana plants, the length of night period, not the length of day period, seems to make the biggest difference. This makes sense if you consider that in the wild, a stormy or cloudy day could shorten the light period a plant receives, but few things in the wild will interrupt the darkness of night.

This has been experimentally verified by some out-of-the-box thinkers. They gave marijuana plants different amounts of light and dark, then watched what happened.

What they found is that a marijuana plant will stay flowering as long as she gets 12+ hours of darkness on a regular basis. The length of day period didn’t seem to matter at all. In fact, you could give plants 12 hours of dark followed by 24 hours of light, on a regular basis, and plants would continue to flower as long as their darkness was uninterrupted for 12 hours at a time.

Check out my marijuana grow light guide for more info about picking out the right grow lights for your situation!

Photoperiod dependent strains vs. auto-flowering strains

So all strains of cannabis that respond to light in this way (where the light period effects what stage they’re in) are called “Photoperiod dependent” strains.

“Auto-flowering” marijuana strains pretty much ignore how much light they get each day. Generally you don’t run into these unless you buy them particularly from a cannabis seed bank.

Marijuana plants have a gender: Is my plant Male or Female?

(Some marijuana plants can also be hermaphrodites, which means they display both male and female parts on the same plant)

Most growers prefer to grow female plants, as only female plant produce buds/flowers.

Note: Once the plant is about 6 weeks old from seed, it will usually show signs of “pre-flowers” which will alert you to the gender before the beginning of the flowering stage.

Pre-Flowers usually reveal the gender around week 6 from seed, or you can wait until the plant switches to the flowering stage.

After 2-3 weeks of the 12-12 light schedule, most marijuana plants will reveal the first signs of their gender (they either are a female plant and start growing buds, YAY! or they are a male plant and start growing balls, NO!).

Why do I not want male marijuana plants?

Only a female marijuana plant makes flowers/buds that contain a usable amount of THC. Male marijuana plants only make pollen sacs that they use to fertilize the females. Most growers will throw away any male plants that they encounter to keep them from fertilizing the female plants. If your female plants do get fertilized, they will use all their energy to produce seeds instead of making buds. This is good if you want seeds, but you will run into the same problem since half of the seeds will also be male.

If you would like to start a breeding program to make your own hybrids, I recommend using a method that creates all-female (feminized) seeds so that you don’t waste time having to identify and throw out male plants.

Getting clones of female marijuana plants or buying feminized seeds online from a seed bank are other ways you can ensure that all your marijuana plants are female.

If you don’t have a choice of seeds, and some of your seeds may be male (like if you just found seeds) than you will want to get your plants to reveal their gender right away so you don’t have to waste time and energy on male plants.

For most marijuana strains, the male plants don’t produce usable amounts of THC, so most growers toss them on sight. Unfortunately, 50% of all regular seeds will become male plants.

These male plants can also impregnate your female plants, which causes them not to produce as many buds, so unless you’re breeding, destroy male plants as soon as you notice them growing grape-like balls where their buds would normally be.

A vigilant grower can carefully watch their plants and remove males when they develop the first signs of pollen sacs.

How to identify female plants if starting out with regular bagseed?

You don’t have to wait for the flowering stage! Below we’ll share two tactics growers use to identify gender in the vegetative stage.

Tactic 1: Preflowers let you identify plants in week 3-6 from seed

Pre-Flowers reveal the gender of your plant by around week 6 from seed, and as early as 3 weeks from seed for some plants.

In this area you’ll find pre-flowers nestled where the “joints” of the plant are.

Tactic 2: Taking a clone and flowering it

The following method can help you identify gender for plants that are taking a while to show their pre-flowers.

If you’re just growing 1, 2, or 3 plants, it can be heartbreaking to find out all your plants are male, and you need to start over in order to make buds.

When marijuana plants are seedlings (or when they’re just seeds), there’s no way to tell which plants are male and which plants are female.

You have to “wait and see.” Male marijuana plants develop pollen sacs (look like little balls or nuts). Female marijuana plants start growing white hairs that develop into the marijuana buds (sensimilla) that contain THC and other cannabinoids. Lots of pictures of male and female parts above.

However, you may want to be more proactive and get rid of the male plants before they enter the flowering stage so you don’t have to waste the time and energy in caring for plants that you will eventually get rid of. If so, then you can use to following technique to identify and remove all the males from your grow.

How to Determine Sex of a Marijuana Plant

You can wait until your plants naturally show the first signs of their gender and then remove all the males, but that means you have to watch the plants closely. You also will waste time and energy growing plants only to find out that some or all are male and have to throw them away. If you want to be more proactive and get rid of all male plants right away, then use this technique.

Take a clone from the unverified marijuana plant

Label both the clone and the mother plant so you know which clone came from which corresponding mother. If you don’t label them clearly, then all your effort will go to waste!

Once the clones have established roots, change just the clones into flowering mode by providing them with a light schedule of 12 hours on, 12 hours off

The clones should start revealing their gender in a week or two. Males will start developing balls and females will start developing white hairs. Click on the pictures below to see some examples of male and female plants.

Once you have determined the gender of your clones, you should make sure you throw away any corresponding male plants.

Learn about marijuana life stages and gender. When does the plant start flowering? How can you tell if your plant is a boy or a girl? What…